Standard Operating Requirements for Pneumatic Cylinders

(1) Normal Conditions: Medium and ambient temperature: –20 to +80°C; Working pressure: 0.1–1.0 MPa. Refer to specific product datasheets for exceptions.

(2) Pre-Installation Test: Pressure test at 1.5× working pressure; no air leakage allowed.

(3) Lubrication: Install an oil mist lubricator at the air inlet. Proper lubrication is critical—poor lubrication causes crawling or complete failure.

(4) Mounting: Align actuation direction correctly. Piston rod must never bear eccentric or lateral loads.

(5) Variable Loads: If load changes during stroke, select a cylinder with ample force margin and add external cushioning.

(6) Stroke Limit: Avoid full stroke—especially on extension—to prevent piston-to-end-cap impact and component damage.